I refinished bathtubs professionally for over 20 years. I’m telling you to do it yourself. Here’s why.
1. The Cost Difference Is Absurd
A professional refinishing job runs $350–600. Most of that is labor. The materials cost $30–80. A quality DIY kit contains the same basic chemistry — epoxy or urethane coating, etching solution, applicators. You’re paying a pro mostly for their time and equipment.
If you have a free Saturday afternoon, you just saved $300+.
2. Replacing a Bathtub Is Brutal
The alternative to refinishing isn’t buying a $400 tub from a big box store. It’s a full demolition job — removing tile, cutting out the old tub, hauling it out (bathtubs are heavy), plumbing work, new tile, new installation. You’re looking at $2,000–5,000 minimum with a contractor.
Refinishing for $40 starts looking very reasonable by comparison.
3. The Prep Work Is the Hard Part — and It’s Not That Hard
People hear “refinishing” and imagine a complicated trade. The actual skill involved is patience, not expertise. The process is:
- Clean it very well
- Sand or etch the surface
- Apply two coats of coating
- Wait for it to cure
That’s it. The complete DIY bathtub refinishing guide walks through every step in detail. I’ve trained dozens of people to do this. The ones who mess it up skip the prep. If you don’t skip the prep, you’ll be fine.
4. You Can Do It in a Weekend
Start Saturday morning. Apply first coat by noon. Second coat by late afternoon. Sunday the surface is dry enough to look at (but not use yet — give it 3 days). You haven’t disrupted your week.
A contractor visit means scheduling, someone in your home, dust, and disruption for 2–4 hours. DIY means you work on your own timeline.
5. Modern Kits Are Good
The kits available now are significantly better than what existed 10 years ago. Rust-Oleum’s Tub & Tile kit uses a proper two-part epoxy — the same chemistry as professional coatings, just in smaller quantities. Homax makes a solid single-part option. The chemistry works when you follow directions.
6. You Control the Quality
When you hire out, you’re trusting someone’s prep work you can’t see. A rushed professional can cut corners on cleaning or etching — problems that show up as peeling six months later. When you do it yourself, you know exactly what happened at every step.
7. It’s a Transferable Skill
Once you’ve done one tub, you understand the process. Your next tub is faster, easier, and cheaper. You can help a friend or family member. The technique applies to tile surrounds, sinks, even shower pans — and you can even use a bathtub refinishing kit on tile with the same basic approach.
8. The Environmental Case
Manufacturing a new bathtub is resource-intensive — mining, smelting, casting, finishing, shipping. Refinishing extends the life of what’s already there. If your tub is structurally sound and you just don’t like how it looks, refinishing is the more sustainable choice by a wide margin.
9. Satisfaction
There’s something genuinely satisfying about fixing something yourself. A tub that looked dingy and yellow turns bright white in an afternoon. You did that. It works, you saved $400, and you know exactly how to do it again.
10. The Pro Finish Is More Achievable Than You Think
People assume a professional finish requires a spray gun and years of practice. A careful DIYer with a quality foam roller, thin coats, and proper cure time can produce a very clean result. Is it identical to a pro spray job? No. Is it 90% as good? Absolutely — and the difference is invisible in daily use. For an honest breakdown of both sides, see refinishing a bathtub yourself — pros and cons.
The One Reason DIY Might Not Be Right for You
If your tub has significant structural damage — deep cracks, holes, major rust-through — a coating alone won’t fix that. Repair the damage first (here’s how to fix common bathtub damage), then refinish. Or if the tub is simply at end of life and replacement makes more sense, do that. Refinishing over a compromised substrate is just delaying the inevitable.
But a tub that’s stained, yellowed, scratched, or just ugly? That’s exactly what refinishing is for. Do it yourself.
Get Started
- Complete DIY Refinishing Guide — full step-by-step
- Best DIY Refinishing Kits — what to buy
- Refinishing a Bathtub — Pros and Cons — honest breakdown
- How Much Does Professional Refinishing Cost? — know what you’re comparing against
Common Questions
How much does it cost to refinish a bathtub yourself?
Materials run about $30 to $80 for a quality DIY kit. A professional job runs $350 to $600 in most markets, and the majority of that difference is labour rather than materials — the chemistry in a good consumer kit is broadly the same as what a pro applies.
How long does DIY bathtub refinishing take?
A weekend. Start Saturday morning, first coat by noon, second coat by late afternoon. The tub looks finished on Sunday but should not be used for at least 48 hours while the coating reaches proper hardness.
Is refinishing hard to do?
The skill involved is patience rather than expertise. Prep is the bulk of the work — cleaning, silicone removal, sanding and etching — and none of it is technically difficult. Rushing prep is what causes failures, not lack of talent.
When should I not refinish my own tub?
If the tub has structural damage — deep cracks, holes, or major rust-through — a coating alone will not fix it. Repair the damage first, or replace the tub. A coating only covers the surface; it adds no strength.